Mary Ann challenged me this winter to see if I could build her a bamboo fly fishing net. I hadn’t built a net before but I had a pretty good idea what I needed to do…but I wasn’t sure if it was even possible. Nothing on a culm of bamboo is straight, and I didn’t know if I could bend the bamboo around the hoop section of the net without breaking it. Well, I took on the challenge and dove into my “Net Building” effort.
The first step was to get some straight strips of bamboo from a culm. Splitting didn’t work because none of the strips came out straight. I pulled together a jig for my band saw that allowed me to saw the strips instead of splitting…worked pretty well.
My jig for sawing bamboo strips.
The next step was to sand down the sawn strips for the Hoop and Handle sections of the net. The hoop strips were sanded down to 0.080″ thick, and the handle strips were sanded down to 0.200″ thick.
Sawn strips for the Hoop and Handle sections.
Time to glue up the strips for the Handle section and sand that down.
Gluing up the Handle.
Handle sanded to thickness, still some shaping to do.
After the handle section was shaped, it was time to glue up everthing into the overall net.
Gluing everything up.
After the glue-up, it was time to shape/finish everything. This was done with a hand plane and lots of hand sanding.
Planing things down.
The finished sanded net. Time to put on the oil finish and attach the bag.
After 10 coats of a hand rubbed oil finish.
The finished net.
This was a fun winter project, and I certainly discovered the challenges of working with bamboo instead of wood in making a net. Time to try it out on the water! And, it’s also time to get back to rod building.
Hi there. My name is Patricio Carey and I want to make my own fly fishing landing net out of bamboo. I was able to get some green or fresh, non treated bamboo “logs”. Is there any place or way I can have more information about your process? Have you steamed /heated the bamboo strips prior bending? The handle is awesome on your design.
Hope you might provide further information.
Regards!
Hi Patricio,
Thanks for inquiring, and the positive comments. I wrote an article in Power Fibers Online Magazine in the October 2018 Issue (#61) that outlined my build process for my first prototype bamboo net. I’ve since modified a lot of steps, but this article should answer a lot of questions for you. For your specific question….I place 5 thin strips of bamboo in the hoop section of the net. Each strip is about 0.070″ thick. I soak the strips in hot water for about 2 hours before I bend them around the frame.
Good luck with things,
Best Regards,
Dave
Thanks for your answer. I’ve been trying to make my own bamboo net… a small one and besides all the efforts, I’m lacking on some knowledge. Two quick questions. How thick are the strips you’re using on the frame? I’m working with 3mm thick strips and I’m having troubles making the frame, the strips tend to crack on very pronounced angles. I’m applying heat with a torch. This leads to the second question. Do you treat the bamboo prior bending? Do you let them on water for a couple of days? Is there any other way to contact you with pictures of my own work?
Thanks in advance